Protect the power cord from being walked on or pinched particularly at plugs, convenience. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
These openings must not be blocked or covered. If you are not sure of the type of power supply at your home, consult your appliance dealer or local power company. If the plug still fails to fit, contact your electrician to replace your outlet.
Do not defeat the safety purpose of the polarized plug. Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords or plugs, convenient receptacles, and the point where they exit from the unit.
For added protection of this CAMCORDER during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. Never push objects of any kind into this CAMCORDER through openings as they may touch dangerous voltage points or short out a part that could result in a fire or electric shock. Never spill liquids of any kind onto the. Should spillage occur, unplug unit and have it checked by a technician before use.
Opening or removing covers may expose you to dangerous voltage or other hazards. When the power-supply cord or plug is damaged. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the CAMCORDER to its normal operation. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer and having the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards. If this power supply is used at V ac, a suitable plug adaptor should be used. For details see lamprecycle. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the. Operation is subject to the following two conditions;. Samsung shall not be responsible for the compensation for damages due to the loss of recorded contents.
It is recommended to copy it from your PC to other recording media for storage. Refer to the software installation and USB connection guide. Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain the permission beforehand.
If unevenness does not disappear, turn the camcorder off, wait for a few moments, and then turn it on again. Out of the total pixels approx. This shows the limitations of the current technology, and does not indicate a fault that will interfere with recording. Normal brightness will be restored when the temperature inside the camcorder rises. Note that the foregoing phenomena have no effect on the image in a storage media, so there is no cause for concern. Take great care that you do not strike it against a hard object or let it fall.
During playback of normally recorded video and audio, noise may also be present in picture and sound. This chapter introduces you to the basic features of your memory camcorder. See the reference pages for more information. Your new memory camcorder comes with the following accessories. See page 39 for compatible memory cards for your memory camcorder. To buy this one, contact your nearest Samsung dealer. This section provides information that you should know before using this memory camcorder; such as how to use the provided accessories, how to charge the battery, how to setup the operation mode and initialize setup.
Please be careful not to turn the swivel handle backward as it may cause damage. When recharging and connecting to external devices, use the cradle for better stability. Put the memory camcorder onto the cradle, while making sure all terminals are well connected.
Connect the power supply or other external devices such as. Install in Refer all servicing to qualified service personnel. Servicing is required when the apparatus has beendamaged in any way, such as power-supply cord or 8. Do not install near any heat sources such asplug is damaged, liquid has been spilled or objectsradiators, heat registers, stoves, or other apparatus have fallen into the apparatus, the apparatus has including amplifiers that produce heat.
Do not defeat the safety purpose of the polarized normally, or has been dropped. A polarized plug has two Apparatus shall not be exposed to dripping orblades with one wider than the other.
A grounding splashing and no objects filled with liquids, such astype plug has two blades and a third groundingvases, shall be placed on the apparatus. The wide blade or the third prong are If the provided plug does Slots and openings in the cabinet are providednot fit into your outlet, consult an electrician forfor ventilation to ensure reliable operation of thereplacement of the obsolete outlet.
Protect the power cord from being walked onThese openings must not be blocked or covered. A CAMCORDER is intended tounit, size of grounding to conductors, location of be operated from battery power, or other sources,antenna-discharge unit, connection to grounding refer to the operating instructions.
Turn the memory camcorder on. Press the EASY. Q button. Q button, all functions on the memory camcorder will be set to off and the recording settings will be set to the following basic modes. Page 53 Digital zooming is possible up to x. Set "Digital Zoom" to "On".
Be sure to keep your fi nger on the Zoom lever. Page Adjusting The Volume When the multi-AV cable is connected to the memory camcorder, the built-in speaker will automatically turn off. Page 56 - Pressing the Control button frame by frame. Access the desired menu screen by following the steps below, then change the various settings. For example: setting the White Balance in Movie Record mode. Page Recording Menu Items Scene Mode AE This memory camcorder automatically sets the shutter speed and aperture according to the subject brightness for optimum recording: You can also specify one of five modes depending on subject conditions, recording environment or purpose of filming.
Page 61 and the message "Set White Balance" are displayed. Frame a white object such as a piece of paper so that it fi lls the screen. Use an object that is not transparent. Page 62 Because the color temperature is different depending on the light source, the subject tint will differ depending on the white balance settings. Use this function for a more natural result. The white balance also can be set in the shortcut menu.
Page 64 The digital effect enables you to give a creative look to your recording. Page 65 Be sure to zoom in on your subject before manually focusing on it. Page 66 Back Light When subject is lit from behind, this function will compensate for lighting so that the subject is not too dark. When it is set to " Wide", the displayed picture may appear wider or rougher than that of screen aspect ratio.
Quality You can select the quality of a movie to be recorded. This memory camcorder can record in the SF super fine , F fine and N normal modes. Up to 34x zoom is performed optically, and after that, up to x zoom is performed digitally. Page Playback Options You can manage recorded movie images in various ways. It operates identically in the full image display single image displayed on the screen.
Page Protecting Movie Images It operates identically in the full image display single image displayed on the screen. For example, if the built-in memory was used, it copies to a memory card. Displays the image in "Off" aspect ratio. Select to use the standard display aspect ratio of on the screen. In this case, the sub menu cannot be accessed or a setting cannot be changed. Button Tips a.
MENU button : Use it to enter or exit the menu. Page 78 "Reset" card. When you set "File No. It is convenient when you want to manage your files on a PC. Page Memory Info It shows you the memory information of the inserted "Card" memory card. If there is no storage media inserted, it can not be selected and will be dimmed on the menu. Format The format function completely delete all fi les and options on the storage media, including protected fi les. Continuous Recording without zoom The continuous recording time of memory camcorder in the table shows the available recording time when the memory camcorder is in the recording mode without using any other function after recording started.
Note that the battery pack discharges faster in cold environment. The charging time will vary depending on the remaining battery level. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then reattach it to the memory camcorder. As the environmental temperature and conditions vary, the remaining battery time may differ from the approximate continuous recording times given in the instructions.
Do not drop the battery pack. Dropping the battery pack may damage itself. There is danger that a child might swallow it. As it is designed to protect the battery pack, if the recharging LED turn on normally within 5 minutes, use the battery pack without a worry. When the battery reaches the end of its life, please contact your local dealer.
The batteries have to be dealt with as chemical waste. It may cause leakage, heat generation, induce overheating or fire. The battery pack is not water resistant. The battery pack may be prone to leakage when fully discharged. Even when the power is switched off, the battery pack will still discharge if it is left attached to the memory camcorder.
If decreased usage time between charges becomes significant, it is probably time to replace it with a new one. Use only approved battery packs. Do not use batteries from other manufacturers. Otherwise, there is a danger of overheating, fire or explosion. Samsung is not responsible for problems occurring due to using unapproved batteries. Using a household power source Make the same connections as you do when charging the battery pack. The battery pack will not lose its charge in this case.
Using memory camcorder with AC power adaptor It is recommended that you use the AC power adaptor to power the memory camcorder from a household AC outlet when you perform settings on it, play back, or use it indoors. Using other AC power adaptors could cause electric shock or result in fire.
An AC plug adaptor is required in some foreign countries. If you need one, purchase it from your distributor. Disconnect the AC power adaptor from the wall outlet immediately if any malfunction occurs while using your memory camcorder. In this case, refer to quot;Warning indicators and messagesquot; on pages and take corrective action. The full and minimum display modes will alternate.
Minimum display mode: Only the operating status indicator will appear. If the memory camcorder has warning information, a warning message will appear. Checking the remaining battery and memory capacity Without turning the camcorder on,you can check the remaining battery time and memory capacity. While connected to AC adaptor without battery inserted, quot;No Batteryquot; message appears.
This effect is also implemented outdoors in bright daylight. N one-level adjustment. It is not a malfunction. Open up the LCD screen 90 degrees with your finger. Rotate it to the best angle to record or play.
This is convenient during playback. Do not lift the memory camcorder when holding the LCD screen. Set the desired mode by pressing the MODE button. Press the MENU button. Press the MENU button to finish. Also used as directional buttons up, down, left, right and to make a selection when selecting movie images or menus. Press the OK button. Press the OK button to confirm your selection. Turning the power on and setting the date and time Set the date and time when using this memory camcorder for the first time.
If you do not set date and time, the date and time time zone screen appears POWER every time you turn on your memory camcorder. When you turn on your camcorder for the first time, the Time Zone screen appears based on Lisbon, London. DST set: daylight saving time 6.
Make sure that the clock is correctly set, then press OK button. Use your camcorder after charging the built-in rechargeable battery. Select quot;Time Zonequot; on the menu, then set quot;Visitquot;. Set the quot;Settingsquot; mode. Press the MENU button to exit the menu. Some cards are not compatible depending on the memory card manufacturer and memory card type.
Selecting the storage media 1. Press the MENU button to exit. The memory card and its data may be damaged. The storage media and its data may be damaged. Turn the memory camcorder off.
0コメント