Install pioneer cdx-fm653

Please checking the grating after changing the pick- 1. For pickup unit CXX handling, please refer up unit See page During replacement, 4 Since these screws protects the mechanism during Description Part No.

Mark No. The encircled numbers denote measuring pointes in the circuit diagram. Reference voltage REFO CH2: SD 0. The parts mounted on this PCB include all necessary parts for several destination.

For further information for respective destinations, be sure to check with the schematic dia Board Chip Part The pickup unit in the CD mechanism module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted pickup unit for the CD mechanism module. Release the clamp 6. To see the amount of dislocation, place the mechanism upside-down.

If the stopper bend has been dislocated in the direction of the first CD, turn VR to the left Fig. VR To lower the stage toward the sixth step by 0. Be careful in handling them because they are very liable to be damaged by electrostatic induction.

Remove the night screws. Remove the Upper Case. Disconnect the connector Fig. Remove the two springs Fig. Insert the short pin from the pickup unit in the flexible substrate. Remove the flexible substrate from the connector. Remove the flexible card from the connector. Remove the lead wires to which the spindle motor and carriage motor assy were soldered. The signal reference potential, therefore, is module of the device. Page 54 CDX-FM - Error Messages If a CD is not operative or stopped during operation due to an error, the error mode is turned on and cause s of the error is indicated with a corresponding number.

This arrangement is intended at reducing nonsense calls from the users and also for facilitating trouble analysis and repair work in servicing.

This manual has 28 pages, file size: 2. Browse by Brand. Manual details Immediate download after payment. Delivered as a PDF file. The manual has 62 pages File size: 3. We guarantee that Haven Keetberglaan 1, Melsele, Belgium. For pickup unit CXX handling, please refer.

During replacement,. During disassembly, be sure to turn the power off. Please checking the grating after changing the pick-. This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.

Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely; you should not risk trying to do so.