Summit x450e-48p manual

If it is on the web site, it is available for sale and we can ship it that day. Call if you need more. Overnight orders after 4pm PT require approval.

Call to confirm overnight orders after 4pm PT. Condition: Seller refurbished Pre-owned, tested by qualified techs, working, reset-to-factory default, grade A condition, and parts needed for normal functions are included as described in the listing.

Switch : G Rev 2. If you want to see the configuration for a particular module e. That can get annoying, particularly if you have set your terminal program to capture the output to a log file. You can turn off the page-by-page display with the command.

So just give it the name of the new config. Note : Neither command will affect license levels or the stacking mode of a switch. Note : The no-refresh shows you the screen once and exits. Otherwise, EXOS will continue to update the display. You can use dotted decimal subnets or CIDR notation when specifying subnets. In EXOS, there are tagged ports and untagged ports.

A tagged port will send and receive If you want untagged traffic to go to a different VLAN, you have to delete the port from the old VLAN before you can add it to the new one as an untagged port. Tagged Ports : Because traffic can be distinguished based on the Which tag value is used is determined by the Q tag value assigned to the VLAN. However, one thing to note is that when SummitStack switches are actually stacked together, QP7 QP2 — QP7 have to be created before they can be used.

To turn on routing on a VLAN. The range is 0 through , higher numbers win. See the. The installation site must be within reach of the network cabling. For all other XG2 series switches, a temperature of. T o prev ent electrostatic damage, attach an electrostatic discharge.

ESD wrist strap t o your wrist before handling the switch. Electrical Hazard: Only qualified personnel should perform. The front panel stack LED on these models. Caution: To ensure proper ventilation and prevent overheating, leave a. War n i n g : A r eadily accessible disconnect device shall be incorporated in the. Caution: The switch can be damaged by electrostatic discharge.

C ontact Extreme Networks if ther e are any. Y ou can install a Summit XG2 Series switch in a rack. There ar e. Secure the XG2 Series switches to the Rack. T o secure the Summit XG2 Series switches to the rack:.

Install Optical T ransceiv e rs. This installation procedur e applies to all optical transceivers. Connect Power t o the Switch. Y ou can connect to a single, primary sour ce of power , or to two. T o power-up y our XG2 Series switch, do the follo wing:. Installation Guide for troubleshooting information.

Caution: Before rack-mounting the device, ensure that th e rack can support it. Note: The rack mounting br ackets provide tw o h oles for securing the Summit.

XG2 Series switches to the rack. Use two scr ews or fasteners appropriate.